Advertisements
Advertisements
प्रश्न
An electrolysis experiment is stopped and the battery terminals are reversed.
विकल्प
The electrolysis will stop
The rate of liberation of material at the electrodes will increase
The rate of liberation of material will remain the same
Heat will be produced at a greater rate
उत्तर
The rate of liberation of material will remain the same
In an electrolytic cell, both the electrodes are made of the same material. Thus, on reversing the terminals of the battery, the direction of the flow of charges will be reversed, but the rate of the electrolysis will remain the same.
APPEARS IN
संबंधित प्रश्न
Show variation of resistivity of copper as a function of temperature in a graph.
Define the term 'conductivity' of a metallic wire. Write its SI unit.
Using the concept of free electrons in a conductor, derive the expression for the conductivity of a wire in terms of number density and relaxation time. Hence obtain the relation between current density and the applied electric field E.
Define current density. Write an expression which connects current density with drift speed
Define the term 'electrical conductivity' of a metallic wire. Write its S.I. unit.
The heat developed in a system is proportional to the current through it.
The specification on a heater coil is 250 V, 500 W. Calculate the resistance of the coil. What will be the resistance of a coil of 1000 W to operate at the same voltage?
For a metallic conductor, what is the relation between current density (J), conductivity (σ) and electric field intensity (E)?
In Figure 3 given below, find the value of resistance x for which points A and B are at the same potential:
figure 3
A carbon resistor is shown in the figure. Using color code, write the value of the resistance.
Fill in the blank.
The ___________, a property of materials C, Si, and Ge depends upon the energy gap between their conduction and valence bands.
Two cells of 1.25 V and 0.75 V are connected in series with anode of one connected to cathode of the other. The effective voltage will be ______.
Assertion: Bending a wire does not effect electrical resistance.
Reason: Resistance of wire is proportional to resistivity of material.
The electric resistance of a certain wire of iron is R. If its length and radius are both doubled, then ______.
The equivalent resistance between A and B is ____________.
As the temperature of conductor increase, it's resistivity and conductivity change. The ratio of resistivity to conductivity.
