Advertisements
Advertisements
प्रश्न
Choose the correct alternative:
Alloys usually have much (lower/higher) temperature coefficients of resistance than pure metals.
उत्तर
Alloys usually have lower temperature coefficients of resistance than pure metals.
APPEARS IN
संबंधित प्रश्न
Two wires of equal length, one of aluminium and the other of copper have the same resistance. Which of the two wires is lighter? Hence explain why aluminium wires are preferred for overhead power cables.
(ρAl = 2.63 × 10−8 Ω m, ρCu = 1.72 × 10−8 Ω m, Relative density of Al = 2.7, of Cu = 8.9.)
What conclusion can you draw from the following observations on a resistor made of alloy manganin?
| Current A |
Voltage V |
Current A |
Voltage V |
| 0.2 | 3.94 | 3.0 | 59.2 |
| 0.4 | 7.87 | 4.0 | 78.8 |
| 0.6 | 11.8 | 5.0 | 98.6 |
| 0.8 | 15.7 | 6.0 | 118.5 |
| 1.0 | 19.7 | 7.0 | 138.2 |
| 2.0 | 39.4 | 8.0 | 158.0 |
Choose the correct alternative:
Alloys of metals usually have (greater/less) resistivity than that of their constituent metals.
Two wires of equal length, one of copper and the other of manganin have the same resistance. Which wire is thicker?
Plot a graph showing the variation of stopping potential with the frequency of incident radiation for two different photosensitive materials having work functions W1 and W2 (W1 > W2). On what factors does the (i) slope and (ii) intercept of the lines depend?
Two resistors A and B have resistances RA and RB, respectively, and RA < RB. The resistivities of their materials are ρA and ρB.
A wire of length 1 m and radius 0.1 mm has a resistance of 100 Ω. Find the resistivity of the material.
What length of a copper wire of cross-sectional area 0.01 mm2 will be needed to prepare a resistance of 1 kΩ? Resistivity of copper = 1.7 × 10–8 Ωm
The electrochemical equivalent of a material depends on _______________ .
How does the resistivity of a semiconductor change with rise of temperature ? Explain.
Choose the correct alternative:
The resistivity of the alloy manganin is nearly independent of/increases rapidly with increase of temperature.
The resistivity of alloy manganin is ______.
Fuse wire should have
If the last band on the carbon resistor is absent, then the tolerance is ______
