Advertisements
Advertisements
प्रश्न
Describe briefly, with the help of a labelled diagram, the basic elements of an A.C. generator.
उत्तर
Basic elements of an A.C. generator
An A.C. generator consists of a rotor shaft on which a coil is mounted. A magnetic field is created around an armature coil with the help of permanent magnets.
The terminals of the coil are connected to two slip rings. Carbon brushes are attached to slip rings so as to make connection with an external circuit.
APPEARS IN
संबंधित प्रश्न
State the principle of an ac generator and explain its working with the help of a labelled diagram. Obtain the expression for the emf induced in a coil. having N turns each of cross-sectional area A, rotating with a constant angular speed 'ω' in a magnetic field `vecB` directed perpendicular to the axis of rotation.
The instantaneous values of alternating current and voltage in a circuit are
i = `1/sqrt2` sin 100π A and
v = `1/sqrt2 sin (100 pi"t" + pi/3)"V"`.
The average power in watts consumed in the circuit is
`20/pi^2`H inductor is connected to a capacitor of capacitance C. The value of C in order to impart maximum power at 50 Hz is
List out the advantages of stationary armature-rotating field system of AC generator.
A flexible metallic loop abcd in the shape of a square is kept in a magnetic field with its plane perpendicular to the field. The magnetic field is directed into the paper normally. Find the direction of the induced current when the square loop is crushed into an irregular shape as shown in the figure.
An alternating e.m.f. is given by e = e0 sin ωt. In what time the e.m.f. will have half its maximum value, if 'e' starts from zero? (T = Time period)
`(sin 30^circ = cos 60^circ = 0.5, cos 30^circ = sin 60^circ = sqrt3/2)`
When the plane of the armature of a generator is parallel to the field. in which it is rotating ______.
The average value of alternating current over a full cycle is always ______. [I0 = Peak value of current]
A common transistor radio set requires 12 V (D.C.) for its operation. The D.C. source is constructed by using a transformer and a rectifier circuit, which are operated at 220 V (A.C.) on standard domestic A.C. supply. The number of turns of secondary coil are 24, then the number of turns of primary are ______.
The coil of an ac generator consists of 100 turns of wire, each of area 0.5 m2. The resistance of the wire is 100 Ω. The coil is rotating in a magnetic field of 0.8 T perpendicular to its axis of rotation, at a constant angular speed of 60 radians per second. Calculate the maximum emf generated and power dissipated in the coil.
