Advertisements
Advertisements
प्रश्न
Suppose the loop is stationary but the current feeding the electromagnet that produces the magnetic field is gradually reduced so that the field decreases from its initial value of 0.3 T at the rate of 0.02 T s−1. If the cut is joined and the loop has a resistance of 1.6 Ω how much power is dissipated by the loop as heat? What is the source of this power?
उत्तर
Sides of the rectangular loop are 8 cm and 2 cm.
Hence, area of the rectangular wire loop,
A = length × width
= 8 × 2
= 16 cm2
= 16 × 10−4 m2
Initial value of the magnetic field, B' = 0.3 T
Rate of decrease of the magnetic field, `("dB")/("dt")` = 0.02 T/s
Emf developed in the loop is given as:
`"e" = ("d"phi)/("dt")`
Where,
`"d"phi` = Change in flux through the loop area = AB
∴ e = `("d"("AB"))/("dt") = ("AdB")/"dt"`
= 16 × 10−4 × 0.02
= 0.32 × 10−4 V
Resistance of the loop, R = 1.6 Ω
The current induced in the loop is given as:
i = `"e"/"R"`
= `(0.32 xx 10^-4)/(1.6)`
= 2 × 10−5 A
Power dissipated in the loop in the form of heat is given as:
P = i2R
= (2 × 10−5) × 1.6
= 6.4 × 10−10 W
The source of this heat loss is an external agent, which is responsible for changing the magnetic field with time.
APPEARS IN
संबंधित प्रश्न
State the principle of an ac generator and explain its working with the help of a labelled diagram. Obtain the expression for the emf induced in a coil. having N turns each of cross-sectional area A, rotating with a constant angular speed 'ω' in a magnetic field `vecB` directed perpendicular to the axis of rotation.
State the principle on which the AC generator works. Draw a labelled diagram and explain its working.
Describe briefly, with the help of a labelled diagram, the basic elements of an A.C. generator.
Answer in brief.
For a very high-frequency AC supply, a capacitor behaves like a pure conductor. Why?
In an electrical circuit, R, L, C, and AC voltage sources are all connected in series. When L is removed from the circuit, the phase difference between the voltage and current in the circuit is `π/3`. Instead, if C is removed from the circuit, the phase difference is again `π/3`. The power factor of the circuit is
The instantaneous values of alternating current and voltage in a circuit are
i = `1/sqrt2` sin 100π A and
v = `1/sqrt2 sin (100 pi"t" + pi/3)"V"`.
The average power in watts consumed in the circuit is
`20/pi^2`H inductor is connected to a capacitor of capacitance C. The value of C in order to impart maximum power at 50 Hz is
Define average value of an alternating current.
Explain the working of a single-phase AC generator with necessary diagram.
The north pole of a bar magnet is rapidly introduced into a solenoid at one end (say A). Which of the following statements correctly depicts the phenomenon taking place?
A resistor, capacitor, and inductor are connected in series across an AC generator. Which of the following statements is false?
The angular frequency of a.cat which a coil of inductance 1 m H has a reactance of l Ω is
The average e.m.f. produced in a coil, when a magnet is inserted into it does not depend upon
A common transistor radio set requires 12 V (D.C.) for its operation. The D.C. source is constructed by using a transformer and a rectifier circuit, which are operated at 220 V (A.C.) on standard domestic A.C. supply. The number of turns of secondary coil are 24, then the number of turns of primary are ______.
The coil of an ac generator consists of 100 turns of wire, each of area 0.5 m2. The resistance of the wire is 100 Ω. The coil is rotating in a magnetic field of 0.8 T perpendicular to its axis of rotation, at a constant angular speed of 60 radians per second. Calculate the maximum emf generated and power dissipated in the coil.
Draw a schematic diagram of an AC generator.
