Advertisements
Advertisements
Question
Suppose the loop is stationary but the current feeding the electromagnet that produces the magnetic field is gradually reduced so that the field decreases from its initial value of 0.3 T at the rate of 0.02 T s−1. If the cut is joined and the loop has a resistance of 1.6 Ω how much power is dissipated by the loop as heat? What is the source of this power?
Solution
Sides of the rectangular loop are 8 cm and 2 cm.
Hence, area of the rectangular wire loop,
A = length × width
= 8 × 2
= 16 cm2
= 16 × 10−4 m2
Initial value of the magnetic field, B' = 0.3 T
Rate of decrease of the magnetic field, `("dB")/("dt")` = 0.02 T/s
Emf developed in the loop is given as:
`"e" = ("d"phi)/("dt")`
Where,
`"d"phi` = Change in flux through the loop area = AB
∴ e = `("d"("AB"))/("dt") = ("AdB")/"dt"`
= 16 × 10−4 × 0.02
= 0.32 × 10−4 V
Resistance of the loop, R = 1.6 Ω
The current induced in the loop is given as:
i = `"e"/"R"`
= `(0.32 xx 10^-4)/(1.6)`
= 2 × 10−5 A
Power dissipated in the loop in the form of heat is given as:
P = i2R
= (2 × 10−5) × 1.6
= 6.4 × 10−10 W
The source of this heat loss is an external agent, which is responsible for changing the magnetic field with time.
APPEARS IN
RELATED QUESTIONS
Obtain the expression for the emf induced in the rotating coil of N turns each of cross-sectional area A, in the presence of a magnetic field `vecB` .
State the principle of an ac generator and explain its working with the help of a labelled diagram. Obtain the expression for the emf induced in a coil. having N turns each of cross-sectional area A, rotating with a constant angular speed 'ω' in a magnetic field `vecB` directed perpendicular to the axis of rotation.
State the principle on which the AC generator works. Draw a labelled diagram and explain its working.
State the working of a.c. generator with the help of a labeled diagram.
The coil of an a.c. generator having N turns, each of area A, is rotated with a constant angular velocity ω. Deduce the expression for the alternating e.m.f. generated in the coil.
What is the source of energy generation in this device?
Answer in brief.
For a very high-frequency AC supply, a capacitor behaves like a pure conductor. Why?
In an electrical circuit, R, L, C, and AC voltage sources are all connected in series. When L is removed from the circuit, the phase difference between the voltage and current in the circuit is `π/3`. Instead, if C is removed from the circuit, the phase difference is again `π/3`. The power factor of the circuit is
`20/pi^2`H inductor is connected to a capacitor of capacitance C. The value of C in order to impart maximum power at 50 Hz is
Explain the working of a single-phase AC generator with necessary diagram.
In an A.C. circuit, the peak value of voltage is 320 volt. Its effective voltage is ______
When the plane of the armature of a generator is parallel to the field. in which it is rotating ______.
A resistor, capacitor, and inductor are connected in series across an AC generator. Which of the following statements is false?
The angular frequency of a.cat which a coil of inductance 1 m H has a reactance of l Ω is
The average e.m.f. produced in a coil, when a magnet is inserted into it does not depend upon
When the speed of a d.c. motor increases the armature current ______
The average value of alternating current over a full cycle is always ______. [I0 = Peak value of current]
A common transistor radio set requires 12 V (D.C.) for its operation. The D.C. source is constructed by using a transformer and a rectifier circuit, which are operated at 220 V (A.C.) on standard domestic A.C. supply. The number of turns of secondary coil are 24, then the number of turns of primary are ______.
The coil of an ac generator consists of 100 turns of wire, each of area 0.5 m2. The resistance of the wire is 100 Ω. The coil is rotating in a magnetic field of 0.8 T perpendicular to its axis of rotation, at a constant angular speed of 60 radians per second. Calculate the maximum emf generated and power dissipated in the coil.
With the help of a labelled diagram, describe the principle and working of an ac generator. Hence, obtain an expression for the instantaneous value of the emf generated.
