Advertisements
Advertisements
प्रश्न
Vapour pressure of pure acetone and chloroform at 328 K are 741.8 mm Hg and 632.8 mm Hg respectively. Assuming that they form ideal solution over the entire range of composition, plot `"P"_"total"`, `"P"_"chloroform"` and `"P"_"acetone"` as a function of `"x"_"acetone"`. The experimental data observed for different compositions of mixtures is:
| `bb(100 xx "x"_"acetone")` | 0 | 11.8 | 23.4 | 36.0 | 50.8 | 58.2 | 64.5 | 72.1 |
| `bb("P"_"acetone"//"mm Hg")` | 0 | 54.9 | 110.1 | 202.4 | 322.7 | 405.9 | 454.1 | 521.1 |
| `bb("P"_"chloroform"//"mm Hg")` | 632.8 | 548.1 | 469.4 | 359.7 | 257.7 | 193.6 | 161.2 | 120.7 |
Plot this data also on the same graph paper. Indicate whether it has a positive or negative deviation from the ideal solution.
उत्तर
| `bb(100 xx "x"_"acetone")` | 0.0 | 0.118 | 023.4 | 0.360 | 0.508 | 0.582 | 0.645 | 0.721 |
| `bb("P"_"acetone"//"mm Hg")` | 0 | 54.9 | 110.1 | 202.4 | 322.7 | 405.9 | 454.1 | 521.1 |
| `bb("P"_"chloroform"//"mm Hg")` | 632.8 | 548.1 | 469.4 | 359.7 | 257.7 | 193.6 | 161.2 | 120.7 |
| `bb("P"_"total" ("mm Hg"))` | 632.8 | 603.0 | 579.5 | 562.1 | 580.4 | 599.5 | 615.3 | 641.8 |
It can be observed from the graph that the plot for the ptotal of the solution curves downward. Therefore, the solution shows a negative deviation from the ideal behaviour.
APPEARS IN
संबंधित प्रश्न
Heptane and octane form an ideal solution. At 373 K, the vapour pressures of the two liquid components are 105.2 kPa and 46.8 kPa respectively. What will be the vapour pressure of a mixture of 26.0 g of heptane and 35 g of octane?
Define an ideal solution and write one of its characteristics.
Two liquids X and Y on mixing gives a warm solution. The solution is ______.
The mass of a non – volatile solute (molar mass 80 g mol-1) should be dissolved in 92g of toluene to reduce its vapour pressure to 90% ______.
State Raoult law and obtain the expression for lowering of vapour pressure when the nonvolatile solute is dissolved Insolvent.
For ideal solution the enthalpy of mixing of the pure components to form the solution is ____________.
For ideal solution the volume of mixing of the pure components to form the solution is ____________.
Which of the following condition is not satisfied by an ideal solution?
If two liquids A and B form minimum boiling azeotrope at some specific composition then ______.
Concentration terms such as mass percentage, ppm, mole fraction and molality are independent of temperature, however molarity is a function of temperature. Explain.
What is “semi permeable membrane”?
Assertion: Molarity of a solution in liquid state changes with temperature.
Reason: The volume of a solution changes with change in temperature.
Assertion: When a solution is separated from the pure solvent by a semipermeable membrane, the solvent molecules pass through it from pure solvent side to the solution side.
Reason: Diffusion of solvent occurs from a region of high concentration solution to a region of low concentration solution.
Which of the following gave the idea of a nucleus of the atom?
While titration dilute HCl solution with aqueous NaOH, which of the following will not be required?
If liquids A and B form an ideal solution then ______.
Assertion (A): The enthalpy of mixing Δmix H is equal to zero for an ideal solution.
Reason (R): For an ideal solution the interaction between solute and solvent molecules is stronger than the interactions between solute-solute or solvent-solvent molecules.
1 mole of liquid A and 2 moles of liquid B make a solution having a total vapour pressure of 40 torr. The vapour pressure of pure A and pure B are 45 torr and 30 torr, respectively. The above solution ______.
Suggest the most important type of intermolecular attractive interaction in the following pair.
n-hexane and n-octane
