मराठी

A Manometer Reads the Pressure of a Gas in an Enclosure as Shown in Fig. 10.25 (A) When a Pump Removes Some of the Gas, the Manometer Reads as in Fig. 10.25 (B) the Liquid Used in the Manometers is Mercury and the Atmospheric Pressure is 76 Cm of Mercury - Physics

Advertisements
Advertisements

प्रश्न

A manometer reads the pressure of a gas in an enclosure as shown in Figure (a) When a pump removes some of the gas, the manometer reads as in Figure (b) The liquid used in the manometers is mercury and the atmospheric pressure is 76 cm of mercury.

(a) Give the absolute and gauge pressure of the gas in the enclosure for cases (a) and (b), in units of cm of mercury.

(b) How would the levels change in case (b) if 13.6 cm of water (immiscible with mercury) are poured into the right limb of the manometer? (Ignore the small change in the volume of the gas).

 

उत्तर

a) 96 cm of Hg & 20 cm of Hg; 58 cm of Hg & –18 cm of Hg

For figure (a)

Atmospheric pressure, P= 76 cm of Hg

Difference between the levels of mercury in the two limbs gives gauge pressure

Hence, gauge pressure is 20 cm of Hg.

Absolute pressure = Atmospheric pressure + Gauge pressure

= 76 + 20 = 96 cm of Hg

For figure (b)

Difference between the levels of mercury in the two limbs = –18 cm

Hence, gauge pressure is –18 cm of Hg.

Absolute pressure = Atmospheric pressure + Gauge pressure

= 76 cm – 18 cm = 58 cm

b) 13.6 cm of water is poured into the right limb of figure (b).

Relative density of mercury = 13.6

Hence, a column of 13.6 cm of water is equivalent to 1 cm of mercury.

Let h be the difference between the levels of mercury in the two limbs.

The pressure in the right limb is given as:

`P_R` Atmospheric pressure + 1 cm of Hg

= 76 + 1 = 77 cm of Hg … (i)

The mercury column will rise in the left limb.

Hence, pressure in the left limb, `P_L = 58 + h`  ... (ii)

Equating equations (i) and (ii), we get:

77 = 58 + h

h = 19 cm

Hence, the difference between the levels of mercury in the two limbs will be 19 cm.

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 10: Mechanical Properties of Fluids - Exercises [पृष्ठ २७०]

APPEARS IN

एनसीईआरटी Physics [English] Class 11
पाठ 10 Mechanical Properties of Fluids
Exercises | Q 22 | पृष्ठ २७०

व्हिडिओ ट्यूटोरियलVIEW ALL [1]

संबंधित प्रश्‍न

Shows in the following figure a siphon. The liquid shown is water. The pressure difference PB − PAbetween the points A and B is


The surface of water in a water tank on the top of a house is 4 m above the tap level. Find the pressure of water at the tap when the tap is closed. Is it necessary to specify that the tap is closed?


The weight of an empty balloon on a spring balance is W1. The weight becomes W2when the balloon is filled with air. Let the weight of the air itself be w. Neglect the thickness of the balloon when it is filled with air. Also neglect the difference in the densities of air inside and outside the balloon.

(a) W2 = W1
(b) W2 = W1 + w
(c) W2 < W1 + w
(d) W2 > W1


A closed vessel is half filled with water. There is a hole near the top of the vessel and air is pumped out from this hole.
(a) The water level will rise up in the vessel.
(b) The pressure at the surface of the water will decrease
(c) The force by the water on the bottom of the vessel will decrease
(d) The density of the liquid will decrease


Suppose the glass of the previous problem is covered by a jar and the air inside the jar is completely pumped out. (a) What will be the answers to the problem? (b)  Show that the answers do not change if a glass of different shape is used provided the height, the bottom area and the volume are unchanged.


Water is filled in a rectangular tank of size 3 m × 2 m × 1 m. (a) Find the total force exerted by the water on the bottom surface on the tank. (b) Consider a vertical side of area 2 m × 1 m. Take a horizontal strip of width δx metre in this side, situated at a depth of x metre from the surface of water. Find the force by the water on this strip. (c) Find the torque of the force calculate in part (b) about the bottom edge of this side.
(d) Find the total force by the water on this side.
(e) Find the total torque by the water on the side about the bottom edge. Neglect the atmospheric pressure and take g = 10 ms−2


A U-tube containing a liquid is accelerated horizontally with a constant acceleration a0. If the separation between the vertical limbs is l, find the difference in the heights of the liquid in the two arms. 


Pressure decreases as one ascends the atmosphere. If the density of air is ρ, what is the change in pressure dp over a differential height dh?


Considering the pressure p to be proportional to the density, find the pressure p at a height h if the pressure on the surface of the earth is p0.


A glass capillary sealed at the upper end is of length 0.11 m and internal diameter 2 × 10-5 m. This tube is immersed vertically into a liquid of surface tension 5.06 × 10-2 N/m. When the length x × 10-2 m of the tube is immersed in liquid then the liquid level inside and outside the capillary tube becomes the same, then the value of x is ______ m. (Assume atmospheric pressure is 1.01 × 105 `"N"/"m"^2`) 


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×