Advertisements
Advertisements
प्रश्न
A solid piece of iron in the form a cuboid of dimensions (49 cm × 33 cm × 24 cm) is moulded into a solid sphere. The radius of the sphere is ______.
पर्याय
19 cm
21 cm
23 cm
25 cm
उत्तर
A solid piece of iron in the form a cuboid of dimensions (49 cm × 33 cm × 24 cm) is moulded into a solid sphere. The radius of the sphere is 21 cm.
Explanation:
Volume of the cuboid = (l × b × h) = 49 × 33 × 24 cm3
Let the radius of the sphere`=4/3`
The volume of the sphere and the cuboid are the same.
Therefore,
`4/3 pi"r"^3 = l × b × h`
`=> 4/3xx22/7xx"r"^3=49xx33xx24`
`=> "r"^3 = 49xx33xx24xx21/88`
`=> "r"^3 = 21xx21xx21`
`=> "r"^3 = (21)^3`
⇒ r = 21 cm
Hence, the radius of the sphere is 21 cm.
APPEARS IN
संबंधित प्रश्न
A well of diameter 2m is dug14m deep. The earth taken out of it is spread evenly all around it to form an embankment of height 40cm. Find width of the embankment?
How many coins 1.75cm in diameter and 2mm thick must be melted to form a cuboid 11cm x 10cm x 75cm___?
The volume of a hemisphere is 2425`1/2cm^3`cm. Find its curved surface area?
A solid iron pole having cylindrical portion 110 cm high and of base diameter 12 cm is surmounted by a cone 9 cm high. Find the mass of the pole, given that the mass of 1 cm3of iron is 8 gm.
The height of a cone is 20 cm. A small cone is cut off from the top by a plane parallel to the base. If its volume be 1/125 of the volume of the original cone, determine at what height above the base the section is made.
12 spheres of the same size are made from melting a solid cylinder of 16 cm diameter and 2 cm height. The diameter of each sphere is
A solid metallic sphere of radius 8 cm is melted and recast into spherical balls each of radius 2 cm. Find the number of spherical balls obtained.
A surahi is a combination of
Find the minimum length in cm and correct to nearest whole number of the thin metal sheet required to make a hollow and closed cylindrical box of diameter 20 cm and height 35 cm. Given that the width of the metal sheet is 1 m. Also, find the cost of the sheet at the rate of Rs. 56 per m.
Find the area of metal sheet required, if 10% of it is wasted in cutting, overlapping, etc.
Find the perimeter and area of the shaded portion of the following diagram; give your answer correct to 3 significant figures. (Take π = 22/7).