Advertisements
Advertisements
प्रश्न
State the order of resistivity of (i) a metal, (ii) a semiconductor and (iii) an insulator.
उत्तर
Metal < Semiconductor < Insulator
APPEARS IN
संबंधित प्रश्न
A p.d. of 4 V is applied to two resistors of 6 Ω and 2 Ω connected in series. Calculate:
(a) the combined resistance
(b) the current flowing
(c) the p.d. across the 6 Ω resistor
If two resistors of 25 Ω and 15 Ω are joined together in series and then placed in parallel with a 40 Ω resistor, the effective resistance of the combination is :
(a) 0.1 Ω
(b) 10 Ω
(c) 20 Ω
(d)40 Ω
What potential difference is needed to drive a current o f 1 A through a 5 Ω resistor?
How will you oonnect five resistors, each of the value one ohm, to obtain an equivalent resistance of 0.2 `Omega`
What do you mean by power rating of an electrical appliance? How do you use it to calculate
(a) the resistance of the appliance and
(b) the safe limit of the current in it, while in use?
When do you say that the resistors are connected in this way? Draw a circuit diagram.
Write an expression for the resistance of a conducting wire in terms of its length and area of cross-section.
Calculate the quantity of heat that will be produced in a coil of resistance 75 Ω if a current of 2A is passed through it for 2 minutes.
The resistance of the hot filament of the bulb is about 10 times the cold resistance. What will be the resistance of 100 W-220 V lamps, when not in use?
If the current I through a resistor is increased by 100% (assume that temperature remains unchanged), the increase in power dissipated will be:
