Advertisements
Advertisements
प्रश्न
The diameter of the base of a cone is 42 cm and its volume is 12936 cm3. Its height is
पर्याय
28 cm
21 cm
35 cm
14 cm
उत्तर
28 cm
Let h be the height of the cone.
Diameter of the cone = 42 cm
Radius of the cone = 21 cm
Then, volume of the cone`= 1/3 pi"r"^2"h"`
`= 1/3xx22/7xx21xx21xx"h"`
= 22 × 21 × h
Therefore,
22 × 21 × h = 12936
`=> h = ((12936)/(22xx21))`
⇒ h = 28 cm
Hence, the height of the cone is 28 cm.
APPEARS IN
संबंधित प्रश्न
A pen stand made of wood is in the shape of a cuboid with four conical depressions to hold pens. The dimensions of the cuboids are 15 cm by 10 cm by 3.5 cm. The radius of each of the depressions is 0.5 cm and the depth is 1.4 cm. Find the volume of wood in the entire stand (see the following figure). Use [π = `22/7`]
A path 2m wide surrounds a circular pond of diameter 40m. how many cubic meters of gravel are required to grave the path to a depth of 20cm ?
The difference between outside and inside surface areas of cylindrical metallic pipe 14 cm long is 44 m2. If the pipe is made of 99 cm3 of metal, find the outer and inner radii of the pipe.
A metallic solid right circular cone is of height 84 cm and the radius of its base is 21 cm. It is melted and recast into a solid sphere. Find the
diameter of the sphere.
Choose the correct answer of the following question:
A metallic solid sphere of radius 9 cm is melted to form a solid cylinder of radius 9 cm. The height of the cylinder is
The volume of a wall, 5 times as high as it is broad and 8 times as long as it is high, is 128 m3. The breadth of the wall is
Rainfall in an area is 5 cm. The volume of the water that falls on 2 hectares of land is
The radii of two cylinders are in the ratio 2 : 3 and their heights are in the ratio 5 : 3. The ratio of their volumes is ______.
Find the minimum length in cm and correct to nearest whole number of the thin metal sheet required to make a hollow and closed cylindrical box of diameter 20 cm and height 35 cm. Given that the width of the metal sheet is 1 m. Also, find the cost of the sheet at the rate of Rs. 56 per m.
Find the area of metal sheet required, if 10% of it is wasted in cutting, overlapping, etc.
Find the perimeter and area of the shaded portion of the following diagram; give your answer correct to 3 significant figures. (Take π = 22/7).
