Advertisements
Advertisements
प्रश्न
The radius of the internal and external surfaces of a hollow spherical shell are 3 cm and 5 cm respectively! If it is melted and recast into a solid cylinder of height `8/3` cm, find the diameter of the cylinder.
उत्तर
Internal radius of hollow spherical shell = r1 = 3 cm.
External radius of hollow spherical = r2 = 5 cm
Volume of hollow spherical = `4/3π(r_2^3 - r_1^3)`
= `4/3π[ (5)^3 - (3)^3]`
= `4/3` π (125 - 127)
= `(4π xx 98)/3`
= `(392π)/3` cm3
Volume of cylinder = πr2h
= πr2 x `8/3`
= `(8 πr^2)/3` cm3
Volume of cylinder = Volume of hallow sphere
`(8 πr^2)/3 = (392π)/3`
r2 = `(392π xx 3)/(8 π xx 3)`
r2 = 49
r = `sqrt49`
r = 7 cm.
The diameter of cylinder = 2r = 2 x 7 = 14 cm.
APPEARS IN
संबंधित प्रश्न
A metal pipe is 77 cm long. The inner diameter of a cross section is 4 cm, the outer diameter being 4.4 cm.(See the given figure)
(i) inner curved surface area,
(ii) outer curved surface area,
(iii) total surface area.
`["Assume "pi=22/7]`
In a hot water heating system, there is a cylindrical pipe of length 28 m and diameter 5 cm. Find the total radiating surface in the system.
`["Assume "pi=22/7]`
The radii of two cylinders are in the ratio 2 : 3 and their heights are in the ratio 5 : 3. Calculate the ratio of their volumes and the ratio of their curved surfaces.
A rectangular sheet of paper, 44 cm × 20 cm, is rolled along its length of form a cylinder. Find the volume of the cylinder so formed.
Find the length of 13.2 kg of copper wire of diameter 4 mm, when 1 cubic cm of copper weighs 8.4 gm.
In the example given below, the radius of the base of a cylinder and its height is given. Then find the curved surface area and total surface area.
r = 7 cm, h = 10 cm
The total surface area of a cylinder is 264m2. Find its volume if its height is 5 more than its radius.
In a cylinder, radius is doubled and height is halved, curved surface area will be ______.
Find the area to be painted in the following block with a cylindrical hole. Given that length is 15 cm, width 12 cm, height 20 cm and radius of the hole 2.8 cm.
A rectangular sheet of paper of size 11 cm × 7 cm is first rotated about the side 11 cm and then about the side 7 cm to form a cylinder, as shown in the diagram. The ratio of their curved surface areas is ______.
