Advertisements
Advertisements
प्रश्न
The volume of a cylinder of height 8cm is 392π cm3. Find its lateral surface area and its total surface area.
उत्तर
Height (h) = 8cm
Let r be the radius of the cylinder.
Volume of cylinder = 392π cm3
i.e., πr2h = 392π
r2 x 8 = 392
r2 = 49
r = `sqrt(49)`
r = 7cm
Now,
L.S.A. of cylinder
= 2 x π x r x h
= `2 xx (22)/(7) xx 7xx 8`
= 352cm2
T.S.A. of cylinder
= (2 x π x r x h) + (2 x π x r2)
= `(2 xx (22)/(7) xx 7 xx 8) + (2 xx (22)/(7) xx 7^2)`
= 352 + 308
= 660cm2.
APPEARS IN
संबंधित प्रश्न
A cylindrical pillar is 50 cm in diameter and 3.5 m in height. Find the cost of painting the curved surface of the pillar at the rate of Rs.12.50 per m2.
`["Assume "pi=22/7]`
The total surface area of a hollow cylinder which is open from both sides is 4620 sq. cm,area of base ring is 115.5 sq. cm and height 7 cm. Find the thickness of the cylinder
The area of the base of a right circular cylinder is 616 cm2 and its height is 25 cm. Find the volume of the cylinder.
2.2 cubic dm of brass is to be drawn into a cylindrical wire 0.25 cm in diameter. Find the length of the wire.
A well with 14 m diameter is dug 8 m deep. The earth taken out of it has been evenly spread all around it to a width of 21 m to form an embankment. Find the height of the embankment.
A well with 10 m inside diameter is dug 8.4 m deep. Earth taken out of it is spread all around it to a width of 7.5 m to form an embankment. Find the height of the embankment.
Write the ratio of total surface area to the curved surface area of a cylinder of radius rand height h.
The radius of a wire is decreased to one-third. If volume remains the same, the length will become
The volume of a cylinder of radius r is 1/4 of the volume of a rectangular box with a square base of side length x. If the cylinder and the box have equal heights, what is r in terms of x?
The total surface area of a hollow metal cylinder, open at both ends of external radius 8 cm and height 10 cm is 338π cm2. Taking r to be inner radius, write down an equation in r and use it to state the thickness of the metal in the cylinder.
