मराठी

Water in a canal, 6 m wide and 1.5 m deep, is flowing at a speed of 4 km/hr. How much area will it irrigate in 10 minutes if 8 cm of standing water is needed for irrigation? - Mathematics

Advertisements
Advertisements

प्रश्न

Water in a canal, 6 m wide and 1.5 m deep, is flowing at a speed of 4 km/hr. How much area will it irrigate in 10 minutes if 8 cm of standing water is needed for irrigation?

बेरीज

उत्तर

We have,

Width of the canal, b = 6 m

Depth of the canal, h = 1.5 m,

Height of the standing water needed for irrigation, H=8 cm = 0.08 m,

speed of the flowing water, l=4 km / h `= 4000/60 = 200/3 "m"// "min"` 

Now,

Volume of water flowing out from canal in 1 min =lbh

`=200/3xx6xx1.5`

=600 m2

⇒ Volume of water flowing out from canal in 10 min = 600 × 10 = 6000 m

`"so, the area of irrigation" = "Volume of water flowing out from canal in 10 min"/"Height of the standing water needed for irrigation"`

`= 6000/0.08`

= 75000 m2

= 7.5 hectare    (As, 1 hectare = 10000 m2)

Hence, it will irrigate 7.5 hectare of area in 10 minutes.

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 19: Volume and Surface Area of Solids - Exercise 19B [पृष्ठ ८९९]

APPEARS IN

आर एस अग्रवाल Mathematics [English] Class 10
पाठ 19 Volume and Surface Area of Solids
Exercise 19B | Q 26 | पृष्ठ ८९९

संबंधित प्रश्‍न

A solid metallic right circular cone 20 cm high and whose vertical angle is 60°, is cut into two parts at the middle of its height by a plane parallel to its base. If the frustum so obtained be drawn into a wire of diameter 1/12 cm, find the length of the wire.


Sushant has a vessel, of the form of an inverted cone, open at the top, of height 11 cm and radius of top as 2.5 cm and is full of water. Metallic spherical balls each of diameter 0.5 cm are put in the vessel due to which 2/th of the water in the vessel flows out. Find how many balls were put in the vessel. Sushant made the arrangement so that the water that flows out irrigates the flower beds. What value has been shown by Sushant?


A copper wire, 3 mm in diameter, is wound about a cylinder whose length is 12 cm, and diameter 10 cm, so as to cover the curved surface of the cylinder. Find the length and mass of the wire, assuming the density of copper to be 8.88 g per cm3.


The diameter and length of a roller is 120 cm and 84 cm respectively. To level the ground, 200 rotations of the roller are required. Find the expenditure to level the ground at the rate of Rs. 10 per sq.m.


Two cubes have their volumes in the ratio 1 : 27. What is the ratio of their surface areas?


A spherical glass vessel has a cylindrical neck that is 7 cm long and 4 cm in diameter. The diameter of the spherical part is 21 cm. Find the quantity of water the vessel can hold.


Choose the correct answer of the following question:

The radii of the circular ends of a bucket of height 40 cm are 24 cm and 15 cm. The slant height (in cm) of the bucket is


The slant height of a bucket is 45 cm and the radii of its top and bottom are 28 cm and 7 cm, respectively. The curved surface area of the bucket is


______ surface area of room = area of 4 walls.


The radius of a metal sphere is 3 cm. The sphere is melted and made into a long wire of uniform circular cross-section, whose length is 36 cm. To calculate the radius of wire, complete the following activity.

Radius of the sphere = `square`

Length of the wire = `square`

Let the radius of the wire by r cm.

Now, Volume of the wire = Volume of the `square`

`square` = `square`

r2 × `square` = `square` × `square`

r2 × `square` = `square`

r = `square`

Hence, the radius of the wire is `square` cm.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×