Advertisements
Advertisements
Question
The `3/4` th part of a conical vessel of internal radius 5 cm and height 24 cm is full of water. The water is emptied into a cylindrical vessel with internal radius 10 cm. Find the height of water in cylindrical vessel.
Solution
Radius of conical vessel r = 5 cm
Height of conical vessel h = 24 cm
The volume of water = `3/4` ×volume of conical vessel
`= 3/4 xx 1/3 pir^2h`
`3/4 xx 1/3 pi xx 25 xx 24`
= 150
Let h' be the height of cylindrical vessel, which filled by the water of conical vessel,
Radius of cylindrical vessel = 10 cm
Clearly,
Volume of cylindrical vessel = volume of water
`pi(10)^2h = 150`
=> h = 1.5 cm
Thus, the height of cylindrical vessel is 1.5 cm.
RELATED QUESTIONS
A cylindrical tank full of water is emptied by a pipe at the rate of 225 litres per minute. How much time will it take to empty half the tank, if the diameter of its base is 3 m and its height is 3.5 m? [Use \[\pi = \frac{22}{7}\]]
A right circular cylinder and a right circular cone have equal bases and equal heights. If their curved surfaces are in the ratio 8 : 5, determine the ratio of the radius of the base to the height of either of them.
The height of a solid cylinder is 15 cm and the diameter of its base is 7 cm. Two equal conical holes each of radius 3 cm and height 4 cm are cut off. Find the volume of the remaining solid.
A wall 24 m , 0.4 m thick and 6 m high is constructed with the bricks each of dimensions 25 cm \[\times\] 16 cm \[\times\] 10 cm . If the mortar occupies \[\frac{1}{10}th\] of the volume of the wall, then find the number of bricks used in constructing the wall.
What is the ratio of the volumes of a cylinder, a cone and a sphere, if each has the same diameter and same height?
A hemispherical tank, full of water, is emptied by a pipe at the rate of `25/7` litres per second. How much time will it take to empty half the tank if the diameter of the base of the tank is 3 m?
If each edge of a cube is increased by 50%, the percentage increase in the surface area is
The curved surface area of a cylindrical pillar is 264 m2 and its volume is 924 m3. The height of the pillar is
Two identical cubes each of volume 64 cm3 are joined together end to end. What is the surface area of the resulting cuboid?
If R is the radius of the base of the hat, then the total outer surface area of the hat is ______.
