Advertisements
Advertisements
प्रश्न
A metal sheet is placed in front of a strong magnetic pole. A force is needed to ______________ .
(a) hold the sheet there if the metal is magnetic
(b) hold the sheet there if the metal is nonmagnetic
(c) move the sheet away from the pole with uniform velocity if the metal is magnetic
(d) move the sheet away from the pole with uniform velocity if the metal is nonmagnetic.
Neglect any effect of paramagnetism, diamagnetism and gravity.
उत्तर
(a) hold the sheet there if the metal is magnetic
(c) move the sheet away from the pole with uniform velocity if the metal is magnetic
(d) move the sheet away from the pole with uniform velocity if the metal is nonmagnetic
The strong magnetic pole will attract the magnet, so a force is needed to hold the sheet there if the metal is magnetic.
If we move the metal sheet (magnetic or nonmagnetic) away from the pole, eddy currents are induced in the sheet. Because of eddy currents, thermal energy is produced in it. This energy comes at the cost of the kinetic energy of the plate; thus, the plate slows down. So, a force is needed to move the sheet away from the pole with uniform velocity.
APPEARS IN
संबंधित प्रश्न
Two spherical bobs, one metallic and the other of glass, of the same size are allowed to fall freely from the same height above the ground. Which of the two would reach earlier and why?
Give one example of use of eddy currents.
Describe briefly three main useful application of eddy currents ?
A metallic bob A oscillates through the space between the poles of an electromagnet (See the figure). The oscillations are more quickly damped when the circuit is on, as compared to the case when the circuit is off. Explain.
Write two examples of their useful applications .
How can the disadvantages of eddy currents be minimized?
State applications of eddy currents.
In which of the following devices, the eddy current is not used ______
The plane in which eddy currents are produced in a conductor is inclined to the plane of the magnetic field at an angle equal to ______.
What are eddy currents?
A constant retarding force of50 N is applied to a body of mass 20 kg moving initially with a speed of 15 ms-1. How long does the body take to stop?
For high frequency, capacity offers
Which one is not an application of eddy current?
Eddy currents are also known as ______
