Advertisements
Advertisements
प्रश्न
(a) Calculate the heat capacity of a copper vessel of mass 150g if the specific heat capacity of copper is `410 J kg^-1 K^-1`
(b) How much heat energy will be required to increase the temperature of the vessel in part (a) from 25°C to 35°C?
उत्तर
Mass of copper vessel = 150 g
= 0.15 kg
The specific heat capacity of copper = `410 J kg^-1K^-1`.
Heat capacity = Mass × specific heat capacity
= `0.15 kg × 410Jkg^-1K^-1`
= `61.5JK^-1`
Change in temperature= (35 − 25)°C = 10°C = 10K
(ii) Energy required to increase the temperature of vessel
ΔQ = mcΔT
= 0.15 × 410 × 10
= 615 J
APPEARS IN
संबंधित प्रश्न
What is the principle of Calorimetry?
Define calorimetry ?
1300 J of heat energy is supplied to raise the temperature of 6.5 kg of lead from 20° C to 40°C. Calculate the specific heat capacity of lead.
Explain the melting point ?
State the principle of calorimeter and define calorie and kilocalorie.
A block of lead of mass 250 g, at 27°C was heated in a furnace till it completely melted. Find the quantity of heat required
(a) To bring the lead block upto its melting point,
(b) To completely melt the block at its melting point (Melting point of lead is 327°C, Sp. heat cap. of lead is 0.13 J/gk and latent heat of fusion of lead is 26 J/g)
Fill in the following blank using suitable word:
The amount of heat required to change the state of a physical substance without any change of temperature is called .......... of the substance.
Name two factors on which the heat energy librated by a body on cooling depends.
How is the loss of heat due to radiation minimised in a calorimeter?
A copper calorimeter of mass 50g contains 100g of water at 20°C. A metallic piece of mass 250 g is heated to 100°C and is then dropped into the calorimeter. The contents of the calorimeter are well stirred and its final highest temperature is recorded to be 28 °C. If the specific heat capacity of water is 4.2 J/g°C and of copper is 0.4 J/g°C, find:
(i) the heat gained by water,
(ii) the heat gained by calorimeter,
(iii) total heat supplied by the metal piece, and
(iv) the specific heat capacity of metal.
