Advertisements
Advertisements
प्रश्न
Consider the situation of the previous problem. Find the average electric field energy stored in the capacitor and the average magnetic field energy stored in the coil.
उत्तर
Given:
Resistance in the LCR circuit, R = 300 Ω
Capacitance in the LCR circuit, C = 20 μF = 20 × 10−6 F
Inductance in the LCR circuit, L = 1 henry
Net impedance of the LCR circuit, Z = 500 ohm
RMS value of voltage, = 50 V
RMS value of current, Irms = 0.1 A
Peak current (I0) is given by,
`I_0 = (E_rms sqrt2) /Z = (50xx 1.4xx414)/(500) = 01414 A`
Electrical energy stored in capacitor is given by,
`U_C = 1/2 CV^2`
`rArr U_C = 1/2 xx 20xx10^-6xx50xx50`
`rArr U_C = 25xx10^-3 J =25 mJ`
Magnetic field energy stored in the coil (UL) is given by,
`U_L = 1/2 LI_0^2`
`rArr U_L = 1/2xx1xx(0.1414)^2`
`rArr U_L ≈ 5xx10^-3 J`
`rArr_L = 5 mJ`
APPEARS IN
संबंधित प्रश्न
When an AC source is connected to an ideal inductor show that the average power supplied by the source over a complete cycle is zero.
A lamp is connected in series with an inductor and an AC source. What happens to the brightness of the lamp when the key is plugged in and an iron rod is inserted inside the inductor? Explain.
An A.C. generator generating an emf of ε = 300 sin (100 πt) V is connected to a series combination of 16μ F capacitor, 1 H inductor and 100 Ω resistor.
Calculate :
1) An impedance of the circuit at the given frequency.
2) Resonant frequency `f_0`
3)Power factor at the resonant frequency `f_0`.
For a given a.c., i = im sin ωt, show that the average power dissipated in a resistor R over a complete cycle is `1/2I_m^2` R .
Define the quality factor in an a.c. circuit. Why should the quality factor have high value in receiving circuits? Name the factors on which it depends.
A resistance is connected to an AC source. If a capacitor is included in the series circuit, will the average power absorbed by the resistance increase or decrease? If an inductor of small inductance is also included in the series circuit, will the average power absorbed increase or decrease further?
A series AC circuit has a resistance of 4 Ω and a reactance of 3 Ω. The impedance of the circuit is
In an AC series circuit, the instantaneous currt is zero when the instantaneous voltage is maximum. Connected to the source may be a
(a) pure inductor
(b) pure capacitor
(c) pure resistor
(d) combination of an inductor and a capacitor
An AC source rated 100 V (rms) supplies a current of 10 A (rms) to a circuit. The average power delivered by the source
(a) must be 1000 W
(b) may be 1000 W
(c) may be greater than 1000 W
(d) may be less than 1000 W
An electric bulb is designed to consume 55 W when operated at 110 volts. It is connected to a 220 V, 50 Hz line through a choke coil in series. What should be the inductance of the coil for which the bulb gets correct voltage?
In a series LCR circuit with an AC source, R = 300 Ω, C = 20 μF, L = 1.0 henry, εrms = 50 V and ν = 50/π Hz. Find (a) the rms current in the circuit and (b) the rms potential difference across the capacitor, the resistor and the inductor. Note that the sum of the rms potential differences across the three elements is greater than the rms voltage of the source.
Answer the following question.
Show that an ideal inductor does not dissipate power in an ac circuit.
The power factor of an a.c circuit having resistance R and inductance L Connected in series to an a.c source of angular frequency co is.
A 100 Ω electric iron is connected to 200 V, 50 Hz ac source. Calculate average power delivered to iron, peak power and energy spent in one minute?
An alternating current I = 14 sin (100 πt) A passes through a series combination of a resistor of 30 Ω and an inductor of `(2/(5pi))` H. Taking `sqrt2` = 1.4 calculate the power factor of the circuit.
