हिंदी

For an ideal gas, the work of reversible expansion under isothermal condition can be calculated by using the expression w = - nRT In V_f/V_i. A sample containing 1.0 mol of an ideal ga - Chemistry

Advertisements
Advertisements

प्रश्न

For an ideal gas, the work of reversible expansion under isothermal condition can be calculated by using the expression w = `- nRT` In `V_f/V_i`. A sample containing 1.0 mol of an ideal gas is expanded isothermally and reversibly to ten times of its original volume, in two separate experiments. The expansion is carried out at 300 K and at 600 K respectively.

(i) Work done at 600 K is 20 times the work done at 300 K.

(ii) Work done at 300 K is twice the work done at 600 K.

(iii) Work done at 600 K is twice the work done at 300 K.

(iv) ∆U = 0 in both cases.

टिप्पणी लिखिए

उत्तर

(iii) Work done at 600 K is twice the work done at 300 K.

(iv) ∆U = 0 in both cases.

Explanation:

For isothermal reversible change, we know

q = – w = `nRT` In `V_f/V_i` = 2.303 `nRT` log `V_f/V_i`

`(W_(600  K))/(W_(300  K)) = (1 xx R xx 600  K  In 1/10)/(1 xx R xx 300  K  In 1/10) = 600/300` = 2

For isothermal expansion of ideal gases, ΔU = 0.

Since temperature is constant this means there is no change in internal energy.

shaalaa.com
Thermodynamics Applications - Work
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 6: Thermodynamics - Multiple Choice Questions (Type - I) [पृष्ठ ७१]

APPEARS IN

एनसीईआरटी एक्झांप्लर Chemistry [English] Class 11
अध्याय 6 Thermodynamics
Multiple Choice Questions (Type - I) | Q 18 | पृष्ठ ७१

संबंधित प्रश्न

The pressure-volume work for an ideal gas can be calculated by using the expression w = `- int_(v_i)^(v_f) p_(ex)  dV`. The work can also be calculated from the pV– plot by using the area under the curve within the specified limits. When an ideal gas is compressed (a) reversibly or (b) irreversibly from volume Vi to Vf. choose the correct option.


Expansion of a gas in vacuum is called free expansion. Calculate the work done and the change in internal energy when 1 litre of ideal gas expands isothermally into vacuum until its total volume is 5 litre?


What will be the work done on an ideal gas enclosed in a cylinder, when it is compressed by a constant external pressure, pext in a single step as shown in figure. Explain graphically.


How will you calculate work done on an ideal gas in a compression, when change in pressure is carried out in infinite steps?


Represent the potential energy/enthalpy change in the following processes graphically.

(a) Throwing a stone from the ground to roof.

(b) \[\ce{1/2 H2(g) + 1/2 Cl2 (g) ⇌ HCl (g) Δ_rH^Θ = - 92.32 kJ mol^{-1}}\]

In which of the processes potential energy/enthalpy change is contributing factor to the spontaneity?


An ideal gas is allowed to expand against a constant pressure of 2 bar from 10 L to 50 L in one step. Calculate the amount of work done by the gas. If the same expansion were carried out reversibly, will the work done be higher or lower than the earlier case? (Given that 1 L bar = 100 J)


Graphically show the total work done in an expansion when the state of an ideal gas is changed reversibly and isothermally from \[\ce{(p_i, V_i)}\] to \[\ce{(p_f , V_f )}\]. With the help of a pV plot compare the work done in the above case with that carried out against a constant external pressure \[\ce{p_f}\].


For silver Cp (J K-1 mol-1) = 23 + 0.01 T. If the temperature (T) of 3 moles of silver is raised from 300 K to 1000 K at 1 atom pressure, the value of ΔH will be close to ______.


Find the work done when 2 moles of hydrogen expand isothermally from 15 to 50 litres against a constant pressure of 1 atm at 25°C.


An ideal gas expands in volume from 1 × 10−3 to 1 × 10−2 m3 at 300 K against a constant pressure of 1 × 105 Nm−2. The work done is ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×