हिंदी
कर्नाटक बोर्ड पी.यू.सी.पीयूसी विज्ञान कक्षा ११

The Emf ε and the Internal Resistance R of the Battery, Shown in the Figure, Are 4.3 V and 1.0 ω Respectively. the External Resistance R is 50 ω. - Physics

Advertisements
Advertisements

प्रश्न

The emf ε and the internal resistance r of the battery, shown in the figure, are 4.3 V and 1.0 Ω respectively. The external resistance R  is 50 Ω. The resistances of the ammeter and voltmeter are 2.0 Ω and 200 Ω respectively. (a) Find the readings of the two meters. (b) The switch is thrown to the other side. What will be the readings of the two meters now?

योग

उत्तर

(a)

The 50 Ω and 200 Ω resistances are in parallel. Their equivalent resistance,

\[R_{eqv} = \frac{50 \times 200}{50 + 200} = 40 \Omega\]

This equivalent resistance and the 2 Ω and 1 Ω resistances are connected in series. The effective resistance of the circuit,

\[R_{eff} = \left( 40 + 2 + 1 \right) = 43 \Omega\]

In this case, the ammeter will read the total current of the circuit. The current through the ammeter,

\[i = \frac{4 . 3}{43} = 0 . 1 A\]

This current will be distributed in the inverse ratio of resistance between the resistances 50 Ω and 200 Ω. The current through the voltmeter,

\[i' = \frac{50}{\left( 50 + 200 \right)}i\]

\[ \Rightarrow i' = 0 . 02 A\]

Reading of the voltmeter = 0.02 × 200 = 4 V


(b)

The two branches AB and CD are in parallel. Their equivalent resistance,

\[R_{eqv} = \frac{52 \times 200}{52 + 200} = 41 . 27 A\]

This equivalent resistance is in series with the 1 Ω resistance. The effective resistance of the circuit,

\[R_{eff} = \left( 41 . 27 + 1 \right) \Omega = 42 . 27 \Omega\]

The total current through the circuit,

\[i = \frac{4 . 3}{42 . 27} = 0 . 1 A\]

In this case, the ammeter will read the current flowing through the 50 Ω resistance, which is i1, as shown. The currents in the two parallel branches will distribute in the inverse ratio of the resistances.

\[\therefore i_1 = \left( \frac{200}{200 + 52} \right)i\]

\[ \Rightarrow i_i = 0 . 08 A\]

The current through the voltmeter = i - i1 = 0.02 A

The reading of the voltmeter = 0.02 × 200 = 4 V

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 10: Electric Current in Conductors - Exercises [पृष्ठ २०१]

APPEARS IN

एचसी वर्मा Concepts of Physics Vol. 2 [English] Class 11 and 12
अध्याय 10 Electric Current in Conductors
Exercises | Q 47 | पृष्ठ २०१

संबंधित प्रश्न

Three resistors 2 Ω, 4 Ω and 5 Ω are combined in parallel. What is the total resistance of the combination?


Two heating elements of resistances R1 and R2 when operated at a constant supply of voltage, V, consume powers P1 and Prespectively. Deduce the expressions for the power of their combination whey they are, in turn, connected in (i) series and (ii) parallel across the same voltage supply.


Two resistances R and 2R are connected in parallel in an electric circuit. The thermal energy developed in R and 2R are in the ratio _______________ .


Which of the following quantities does not change when a resistor connected to a battery is heated due to the current?


Suppose you have three resistors of 20 Ω, 50 Ω and 100 Ω. What minimum and maximum resistance can you obtain from these resistors?


A bulb is made using two filaments. A switch selects whether the filaments are used individually or in parallel. When used with a 15 V battery, the bulb can be operated at 5 W, 10 W or 15 W. What should be the resistances of the filaments?


An ideal battery sends a current of 5 A in a resistor. When another resistor of 10 Ω is connected in parallel, the current through the battery is increased to 6 A. Find the resistance of the first resistor.


A wire of resistance 15.0 Ω is bent to form a regular hexagon ABCDEFA. Find the equivalent resistance of the loop between the points (a) A and B (b) A and C and (c) Aand D.


Find the current measured by the ammeter in the circuit shown in the figure.


An ammeter is to be constructed that can read currents up to 2.0 A. If the coil has resistance of 25 Ω and takes 1 mA for full-scale deflection, what should be the resistance of the shunt used?


In a meter bridge circuit, resistance in the left-hand gap is 2 Ω and an unknown resistance  X is in the right-hand gap as shown in the figure below. The null point is found to be 40 cm from the left end of the Wire. What resistance should be connected to X so that the new null point is 50 cm from the left end of the wire?


To get maximum current in a resistance of 3 ohms, one can use n rows of m cells (connected in series) connected in parallel. If the total number of cells is 24 and the internal resistance of a cell is 0.5 ohms then ______.


Combine three resistors 5 Q, 4.5 Q and 3 Q in such a way that the total resistance of this combination is maximum ______.


In parallel combination of n cells, we obtain ______.


Assertion (A): To increase the range of an ammeter, we must connect a suitable high resistance in series to it.

Reason (R): The ammeter with increased range should have high resistance.

Select the most appropriate answer from the options given below:


The figure shows three conductors I, II and III of same material, different lengths l, 2l and 3l and of different areas of cross-sections 3A, A and 2A respectively. Arrange them in the increasing order of current drawn from the battery.


Two electric lamps of each 40 watt are connected in series. The power consumed by the combination will be


An electric cable of copper has just one wire of radius 9 mm. Its resistance is 14Ω. If this single copper wire of the cable is replaced by seven identical well insulated copper wires each of radius 3 mm connected in parallel, then the new resistance of the combination will be:


Eight identical cells, each of emf 2V and internal resistance 3 Ω, are connected in series to form a row. Six such rows are connected in parallel to form a battery. This battery is now connected to an external resistor R of resistance 6 Ω. Calculate:

  1. emf of the battery.
  2. internal resistance of the battery.
  3. current flowing through R.

Three bulbs B1 (230V, 40W), B2 (230V, 60W) and B3 (230V, 100W) are connected in series to a 230V supply. Which bulb glows the brightest?


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×