Advertisements
Advertisements
प्रश्न
A rectangular wire loop of sides 8 cm and 2 cm with a small cut is moving out of a region of uniform magnetic field of magnitude 0.3 T directed normal to the loop. What is the emf developed across the cut if the velocity of the loop is 1 cm s−1 in a direction normal to the
- longer side,
- shorter side of the loop?
For how long does the induced voltage last in each case?
उत्तर
Magnetic flux passing through an area A placed perpendicular to the magnetic field B is Φ = BA.
Let the length of the loop be l and width b and the magnitude of its velocity be. As soon as the loop is taken out of the magnetic field perpendicular to the longer side, the area bounded by the field changes, which leads to a change in From Faraday's law, the magnitude of the induced electromotive force is
|e| = `"dΦ"/"dt"`
= `"d"/"dt"("BA")`
= `"B" ("dA"/"dt")`
Now, `"dA"/"dt"` = lv ....(Area enclosed by the loop per second)
Hence, |e| = Blv = 0.3 weber/m2 × (8 × 10-2 m) × (10-2 m/s)
= 2.4 × 10-4 weber/second
= 2.4 × 10-4 Volt
= 0.24 millivolts
The induced potential difference will remain as long as the flux changes. Thus, the time for the potential difference |e| to persist
= `"b"/"v"`
= `(2 xx 10^-2 "m")/(10^-2 "m/s")`
= 2 s
From figure (b), `"dA"/"dT" = "bv"`
|e| = Bbv
= 0.3 × (2 × 10-2) × 10-2
= 0.6 × 10-4 volt
= 0.06 millivolt
|e| the duration of the = `l/v`
= `(8 xx 10^-2 "m")/(10^-2 "m/s")`
= 8 s
APPEARS IN
संबंधित प्रश्न
State three differences between direct current and alternating current.
What is electromagnetic induction?
A circular coil of cross-sectional area 200 cm2 and 20 turns is rotated about the vertical diameter with angular speed of 50 rad s−1 in a uniform magnetic field of magnitude 3.0 × 10−2T. Calculate the maximum value of the current in the coil.
State whether the following statement are true or false:
A motor works on the principle electric generator?
When current is 'switched on' and 'switched off' in a coil, a current is induced in another coil kept near it. What is this phenomenon known as?
Name one device which works on the phenomenon of electromagnetic induction.
The switches in figure (a) and (b) are closed at t = 0 and reopened after a long time at t = t0.
(a) The charge on C just after t = 0 is εC.
(b) The charge on C long after t = 0 is εC.
(c) The current in L just before t = t0 is ε/R.
(d) The current in L long after t = t0 is ε/R.
A conducting square loop having edges of length 2.0 cm is rotated through 180° about a diagonal in 0.20 s. A magnetic field B exists in the region which is perpendicular to the loop in its initial position. If the average induced emf during the rotation is 20 mV, find the magnitude of the magnetic field.
Draw a simple labeled diagram of a step-down transformer.
The diagram shows a rectangular coil ABCD, suspended freely between the concave pole pieces of a permanent horseshoe magnet, such that the plane of the coil is parallel to the magnetic field.
(i) State your observation, when current is switched on.
(ii) Give an explanation for your observation in (i).
(iii) State the rule, which will help you to find the motion of rotation of coil.
(iv) In which position will the coil ultimately come to rest?
(v) State four ways of increasing the magnitude of force acting on the coil.
The energy stored in a 50 mH inductor carrying a current of 4 A is ______
Observe the given figure of Fleming’s Right Hand Rule and write the labels of A and B correctly.
The right-hand thumb rule is also called _______ rule.
Establish the fact that the relative motion between the coil and the magnet induces an emf in the coil of a closed circuit.
A layer of atmosphere that reflects medium frequency radio waves which is ineffective during night, is ______.
We can induce the current in a coil by ____________.
A galvanometer is an instrument that can detect the presence of a current in a circuit.
Which type of force is experienced by a moving charge in a magnetic field?
