Advertisements
Advertisements
प्रश्न
A resistor of 500 Ω and an inductance of 0.5 H are in series with an AC source which is given by V = `100 sqrt2` sin (1000 t). The power factor of the combination is ______.
पर्याय
`1/sqrt2`
`1/sqrt3`
0.5
0.6
उत्तर
A resistor of 500 Ω and inductance of 0.5 H is in series with an AC source which is given by V = `100 sqrt2` sin (1000 t). The power factor of the combination is `1/sqrt2`.
Explanation:
Substitute the given values from
L = 0.5 H .....(1)
R = 500 Ω .....(2)
V = `100sqrt(2) sin(1000t)` .....(3)
On comparing with, V = `V_0 sin(wt)`
We get, `w = 1000s^-1` .....(4)
Put the values in equation (1) and (4) and calculate:
Let, Inductive reactance XL
XL = `w_L` = 1000 × 0.5
XL = 500 Ω ......(5)
Since, Power factor `cos phi`
`cos phi = R/sqrt(X_L^2 + R^2)` ....(7)
∴ `cos phi = 500/sqrt(500^2 + 500^2)`
`cos phi = 500/(500sqrt(2)`
`cos phi = 1/sqrt(2)`
Therefore, P.F = `cos phi = 1/sqrt(2)`
APPEARS IN
संबंधित प्रश्न
Obtain an expression for average power dissipated in a purely resistive A.C. circult.
In a series LCR circuit, the phase difference between the voltage and the current is 45°. Then the power factor will be ______.
Answer in brief.
What is wattles current?
When an AC source is connected to an ideal inductor show that the average power supplied by the source over a complete cycle is zero.
Prove that an ideal capacitor in an AC circuit does not dissipate power
(a) An emf e = e0 sin ωt applied to a series L - C - R circuit derives a current I = I0sinωt in the circuit. Deduce the expression for the average power dissipated in the circuit.
(b) For circuits used for transporting electric power, a low power factor implies large power loss in transmission. Explain.
An AC source generating a voltage e = e0sinωt is connected to a capacitor of capacitance C. Find the expression for the current i flowing through it. Plot a graph of e and i versus ωt.
A light bulb is rated 100W for 220 V AC supply of 50 Hz. Calculate
- resistance of the bulb.
- the rms current through the bulb
A 100 μF capacitor is charged with a 50 V source supply. Then source supply is removed and the capacitor is connected across an inductance, as a result of which 5A current flows through the inductance. Calculate the value of the inductance.
What is meant by wattles current?
L-C-R series circuit contains a resistance of 10 Ω and self-inductance 0.4 H connected in series with variable capacitor across 60 V and 50 Hz supply. The value of capacity at resonance will be π2 = 10.
An alternating e.m.f. of 0.2 V is applied across an LCR series circuit having R = 4 `Omega`, C = 80 µF and L = 200 mH. At resonance the voltage drop across the inductor is ____________.
In series 'LR' circuit and in series 'RC' circuit, same current is flowing. If the frequency of e.m.f. of a.c. is increased for both the circuits, the impedance will ____________.
In series LCR circuit, resistance is 18 `Omega` and impedance is 33 `Omega`. An r.m.s. voltage of 220 V is applied across the circuit. The true power consumed in a.c. circuit is ____________.
In LCR series circuit, an alternating e.m.f. 'e' and current 'i' are given by the equations e = 100 sin (100 t) volt,
`"i" = 100 "sin" (100"t" + pi/3)"mA"`.
The average power dissipated in the circuit will be ____________.
An e.m.f. E = E0 sin `omega`t is applied to a circuit containing 'L' and 'R' in series. If XL = R, then the power dissipated in the circuit is ____________.
The voltage gain of a CE amplifier is 50. A sinusoidal ac of amplitude 10 mV is applied as a signal. The output of the amplifier will be ______.
Two unknown resistances are connected in two gaps of a meter-bridge. The null point is obtained at 40 cm from left end. A 30 Ω resistance is connected in series with the smaller of the two resistances, the null point shifts by 20 cm to the right end. The value of smaller resistance Ω is ______.
In series LCR circuit R = 18 Ω and impedance is 33 Ω An rms voltage 220V is applied across the circuit. The ture power consumed in AC circuit is ______.
A conductor lies along the Z-axis at −1.5 ≤ Z ≤ 1.5 m and carries a fixed current of 10.0 A in −az direction as (see figure). For a field B = 3.0 × 10−4`"e"^(−0.2"x")`ay T, find the power required to move the conductor at constant speed to x = 2.0 m, y = 0 in 5 × 10−3 s. Assume parallel motion along the x-axis.
What is the average value of alternating current over a complete cycle?
The power factor of LCR circuit is ______.
The effective capacitor between A and B in the following circuit is ______.
Explain the theory of an AC circuit with a resistor.