Advertisements
Advertisements
प्रश्न
In a communication system, what is meant by modulation?
उत्तर
Superimposition of low-frequency message signal on high-frequency carrier wave called modulation.
APPEARS IN
संबंधित प्रश्न
Due to economic reasons, only the upper sideband of an AM wave is transmitted, but at the receiving station, there is a facility for generating the carrier. Show that if a device is available which can multiply two signals, then it is possible to recover the modulating signal at the receiver station.
Explain the need for modulation related to the size of antenna (aerial).
A carrier wave of peak voltage 15 V is used to transmit a message signal. Find the peak voltage of the modulating signal in order to have a modulation index of 60%
The carrier wave is represented by
Answer the following question.
Why a signal transmitted from a TV tower cannot be received beyond a certain distance? Write the expression for the optimum separation between the receiving and the transmitting antenna.
A 20 volt AC is applied to a circuit consisting of a resistance and a coil with negligible resistance. If the voltage across the resistance is 12 volt, the voltage across the coil is ______.
Broadcasting antennas are generally ______.
A speech signal of 3 kHz is used to modulate a carrier signal of frequency 1 MHz, using amplitude modulation. The frequencies of the sidebands will be ______.
A male voice after modulation-transmission sounds like that of a female to the receiver. The problem is due to ______.
A transmitting antenna has a height of 320 m and that of receiving antenna is 2000 m. The maximum distance between them for satisfactory communication in line of sight mode is 'd'. The value of 'd' is ______ km.
