मराठी
कर्नाटक बोर्ड पी.यू.सी.पीयूसी विज्ञान इयत्ता ११

Two Voltameters, One with a Solution of Silver Salt and the Other with a Trivalent-metal Salt, Are Connected in Series and a Current of 2 a is Maintained for 1.50 Hours. - Physics

Advertisements
Advertisements

प्रश्न

Two voltameters, one with a solution of silver salt and the other with a trivalent-metal salt, are connected in series and a current of 2 A is maintained for 1.50 hours. It is found  that 1.00 g of the trivalent metal is deposited. (a) What is the atomic weight of the trivalent metal?
(b) How much silver is deposited during this period? Atomic weight of silver is 107.9 g mol−1.

बेरीज

उत्तर

Given:-

Mass of salt deposited, m = 1 g

Current, i = 2 A

Time, t = 1.5 hours = 5400 s

For the trivalent metal salt:-

Equivalent mass = \[\frac{1}{3}\] Atomic weight

The E.C.E of the salt,

\[Z = \frac{\text{Equivalent mass}}{96500} = \frac{\text{Atomic weight}}{3 \times 96500}\]

(a) Using the formula, m = Zit, we get:-

\[1 \times  {10}^{- 3}  = \frac{\text{Atomic weight}}{3 \times 96500} \times 2 \times 5400\]

\[ \Rightarrow\text{Atomic weight }= \frac{3 \times 96500 \times {10}^{- 3}}{2 \times 5400} =   26 . 8 \times  {10}^{- 3}\text{ kg/mole}\]

\[ \Rightarrow \text{Atomic weight }= 26 . 8\text{ g/mole}\]


(b) Using the relation between equivalent mass and mass deposited on plates, we get:-

\[\frac{E_1}{E_2} = \frac{m_1}{m_2}\]

\[ \Rightarrow \frac{26 . 8}{3 \times 107 . 9} = \frac{1}{m_2}\]

\[ \Rightarrow m_2 = 12 . 1 g\]

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 11: Thermal and Chemical Effects of Current - Exercises [पृष्ठ २१९]

APPEARS IN

एचसी वर्मा Concepts of Physics Vol. 2 [English] Class 11 and 12
पाठ 11 Thermal and Chemical Effects of Current
Exercises | Q 20 | पृष्ठ २१९

संबंधित प्रश्‍न

Three resistors 2 Ω, 4 Ω and 5 Ω are combined in parallel. What is the total resistance of the combination?


Two resistances R and 2R are connected in parallel in an electric circuit. The thermal energy developed in R and 2R are in the ratio _______________ .


Suppose you have three resistors of 20 Ω, 50 Ω and 100 Ω. What minimum and maximum resistance can you obtain from these resistors?


If the reading of the ammeter, A1 in the following figure is 2.4 A, what will be the readings of ammeters A2 and A3? Neglect the resistances of the ammeters.


A bulb is made using two filaments. A switch selects whether the filaments are used individually or in parallel. When used with a 15 V battery, the bulb can be operated at 5 W, 10 W or 15 W. What should be the resistances of the filaments?


Find the equivalent resistance of the circuits shown in the figure between the points a and b. Each resistor has resistance r.


A voltmeter coil has resistance 50.0 Ω and a resistor of 1.15 kΩ is connected in series. It can read potential differences up to 12 volts. If this same coil is used to construct an ammeter that can measure currents up to 2.0 A, what should be the resistance of the shunt used?


Two resistors of equal resistances are joined in series and a current is passed through the combination. Neglect any variation in resistance as the temperature changes. In a given time interval,

(a) equal amounts of thermal energy must be produced in the resistors

(b) unequal amounts of thermal energy may be produced

(c) the temperature must rise equally in the resistors

(d) the temperature may rise equally in the resistors


Two resistors R1= 60 Ω and R2 = 90Ω are connected in parallel. If electric power consumed by the resistor R1 is15 W, calculate the power consumed by the resistor R2.


How much resistance should be connected to 15 Ω resistor shown in the circuit in figure below so that the points M and N are at the same potential:


An ammeter together with an unknown resistance in series is connected across two identical batteries each of emf 1.5 V. When the batteries are connected in series, the galvanometer records a current of 1A and when the batteries are in parallel, the current is 0.6A. Then the internal resistance of the battery is ______.


To get maximum current in a resistance of 3 ohms, one can use n rows of m cells (connected in series) connected in parallel. If the total number of cells is 24 and the internal resistance of a cell is 0.5 ohms then ______.


In the series combination of two or more than two resistances ______.

Two or more resistors are said to be in ...A... if one end of all resistors is joined together and similarly the other ends joined together, Here, A refers to ______.

In parallel combination of n cells, we obtain ______.


The figure shows three conductors I, II and III of same material, different lengths l, 2l and 3l and of different areas of cross-sections 3A, A and 2A respectively. Arrange them in the increasing order of current drawn from the battery.


Two electric lamps of each 40 watt are connected in series. The power consumed by the combination will be


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×