Advertisements
Advertisements
प्रश्न
A coil has a resistance of 10 Ω and an inductance of 0.4 henry. It is connected to an AC source of 6.5 V, `30/pi Hz`. Find the average power consumed in the circuit.
उत्तर
Given:
Resistance of coil, R = 10 Ω
Inductance of coil, L = 0.4 Henry
Voltage of AC source, Erms = 6.5 V
Frequency of AC source, `f = 30/pi Hz`
Reactance of resistance-inductance circuit (Z) is given by,
`Z = sqrt(R^2 + X_L^2`
Here, R = resistance of the circuit
XL = Reactance of the pure inductive circuit
`Z = sqrt(R^2 + (2pifL)^2`
Average power consumed in the circuit (P) is given by,
`P = E_{rms}l_{rms}cosØ`
`therefore P = 6.5 xx 6.5/Z xx R/Z`
⇒ P = `(6.5xx6.5xx10)/((sqrt(R^2 +(omegaL)^2))`
⇒ P =` (6.5xx6.5xx10)/(100 + 576)`
⇒ `P= (6.5xx6.5xx10)/(676)`
⇒ `P = 0.625 = 5/8 W`
APPEARS IN
संबंधित प्रश्न
An alternating emf of 220 V is applied to a circuit containing a resistor R having the resistance of 160Ω and a capacitor ‘C’ is series. The current is found to lead the supply voltage by an angle
`θ = tan^(-1) ("3/4")`
a) Calculate
1) The capacitive reactance
2) The impedance of the circuit
3) Current flowing in the circuit
b) If the frequency of the applied emf is 50 Hz, what is the value of the capacitance of the capacitor ‘C’?
The power factor of an a.c. circuit is 0.5. What is the phase difference between voltage and current in this circuit ?
A resistance is connected to an AC source. If a capacitor is included in the series circuit, will the average power absorbed by the resistance increase or decrease? If an inductor of small inductance is also included in the series circuit, will the average power absorbed increase or decrease further?
A series AC circuit has a resistance of 4 Ω and a reactance of 3 Ω. The impedance of the circuit is
Transformers are used ______.
In an AC series circuit, the instantaneous currt is zero when the instantaneous voltage is maximum. Connected to the source may be a
(a) pure inductor
(b) pure capacitor
(c) pure resistor
(d) combination of an inductor and a capacitor
In a series LCR circuit with an AC source, R = 300 Ω, C = 20 μF, L = 1.0 henry, εrms = 50 V and ν = 50/π Hz. Find (a) the rms current in the circuit and (b) the rms potential difference across the capacitor, the resistor and the inductor. Note that the sum of the rms potential differences across the three elements is greater than the rms voltage of the source.
Consider the situation of the previous problem. Find the average electric field energy stored in the capacitor and the average magnetic field energy stored in the coil.
Following figure shows a typical circuit for a low-pass filter. An AC input Vi = 10 mV is applied at the left end and the output V0 is received at the right end. Find the output voltage for ν = 10 k Hz, 1.0 MHz and 10.0 MHz. Note that as the frequency is increased the output decreases and, hence, the name low-pass filter.
What is the value of power factor for a pure resistor connected to an alternating current source ?
Answer the following question.
Show that an ideal inductor does not dissipate power in an ac circuit.
In previous questions 3 and 4, what is the net power absorbed by each circuit over a complete cycle. Explain your answer.
Suppose the circuit has a resistance of 15 Ω. Obtain the average power transferred to each element of the circuit, and the total power absorbed.
In which of the following circuits the maximum power dissipation is observed?
Quality factor and power factor both have the dimensions of ______.
The average power dissipation in a pure capacitor in A.C circuit is
In the series LCR circuit, the power dissipation is through ______
