हिंदी

Given the resistances of 1 Ω, 2 Ω, 3 Ω, how will be combine them to get an equivalent resistance of 6 Ω? - Physics

Advertisements
Advertisements

प्रश्न

Given the resistances of 1 Ω, 2 Ω, 3 Ω, how will be combine them to get an equivalent resistance of 6 Ω?

संख्यात्मक

उत्तर

Equivalent resistance, R’ = 6 Ω

Consider the series combination of the resistors, as shown in the given circuit.

Equivalent resistance of the circuit is given by the sum,

R’ = 1 + 2 + 3 = 6 Ω

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 3: Current Electricity - Exercise [पृष्ठ १२९]

APPEARS IN

एनसीईआरटी Physics [English] Class 12
अध्याय 3 Current Electricity
Exercise | Q 3.20 (b) (iii) | पृष्ठ १२९

वीडियो ट्यूटोरियलVIEW ALL [2]

संबंधित प्रश्न

Determine the current in each branch of the network shown in figure.


A capacitor of capacitance 8.0 μF is connected to a battery of emf 6.0 V through a resistance of 24 Ω. Find the current in the circuit (a) just after the connections are made and (b) one time constant after the connections are made.


Solve the following question.
Using Kirchhoff’s rules, calculate the current through the 40 Ω and 20 Ω  resistors in the following circuit. 


A copper wire of 10-6 m2 area of cross-section, carries a current of 2 A. If the number of electrons per cubic meter is 8 × 1028, calculate the current density and average drift velocity.


In a potentiometer arrangement, a cell of emf 1.25 V gives a balance point at 35 cm length of the wire. If the cell is replaced by another cell and the balance point shifts to 63 cm, what is the emf of the second cell?


The instrument for the accurate measurement of the e.m.f of a cell is ______.


The Kirchhoff's second law (ΣiR = ΣE), where the symbols have their usual meanings, is based on ______.


In a meter bridge the point D is a neutral point (Figure).

  1. The meter bridge can have no other neutral point for this set of resistances.
  2. When the jockey contacts a point on meter wire left of D, current flows to B from the wire.
  3. When the jockey contacts a point on the meter wire to the right of D, current flows from B to the wire through galvanometer.
  4. When R is increased, the neutral point shifts to left.

Why are alloys used for making standard resistance coils?


Power P is to be delivered to a device via transmission cables having resistance RC. If V is the voltage across R and I the current through it, find the power wasted and how can it be reduced.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×