Advertisements
Advertisements
प्रश्न
The following question relate to the electroplating of an article with silver.
What should be the nature of the anode?
उत्तर
The metal to be plated on the article must be made anode. It needs to be periodically replaced.
APPEARS IN
संबंधित प्रश्न
Name the metallic ions that should be present in the electrolyte when an article made of copper is to be electroplated with silver.
Give reasons why In the electroplating of an article with silver, the electrolyte sodium argentocyanide solution is preferred over silver nitrate solution.
Choose the correct answer from the options given below:
The electrolyte used for electroplating an article with silver is
A. Silver nitrate solution
B. Silver cyanide solution
C. Sodium argentocyanide solution
D. Nickel sulfate solution
State the electrode reaction at the anode during electrolysis of:
Aqueous copper sulphate solution.
The following question relate to the electroplating of an article with silver.
Name the electrode formed by the article which is to be plated.
Element X is a metal with valency 2. Element Y is a non-metal with valency 3.
(a) Write equations to show how X and Y form ions.
(b) If Y is diatomic gas, write the equation for the direct combination of X and Y to form a compound.
(c) Write two applications of electrolysis in which anode diminish in mass.
(d) If the compound formed between X and Y is melted and an electric current passed through the molten compound, the element X will be obtained at the _____ and the Y at the ________of the electrolytic cell. (Provide the missing words).
A solution of silver nitrate is a good electrolyte but is not used for electroplating an article with silver.
Draw a labelled diagram to show how iron is electroplated with copper.
Describe what happens to the iron object and the copper rod.
Electroplating steel objects with silver involves a three-step process.
Step 1: A coating of copper is applied to the object.
Step 2: A coating of nickel is applied to the object.
Step 3: The coating of silver is applied to the object.
-
- A diagram of the apparatus used for step 1 is shown
- The chemical process taking place on the surface of the object is \[\ce{Cu^2+(aq) + 2e- ->Cu(s)}\]
What is the observation seen on the surface of the object? - Explain why the concentration of copper ions in the electrolyte remains constant throughout step 1.
- The chemical process taking place on the surface of the object is \[\ce{Cu^2+(aq) + 2e- ->Cu(s)}\]
- A diagram of the apparatus used for step 1 is shown
- Give two changes which would be needed in order to coat nickel on to the object in step 2.
- Write down the reaction taking place at the positive electrode during step 3.
