Advertisements
Advertisements
Question
Draw a neat labelled diagram of rise of liquid in capillary tube showing different components of tension (force).
Solution
r = radius of capillary tube
h = height of liquid level in the tube
T = surface tension of liquid
ρ = density of liquid
g = acceleration due to gravity
APPEARS IN
RELATED QUESTIONS
Calculate the density of paraffin oil, if glass capillary of diameter 0.25 mm dipped in paraffin oil of surface tension 0.0245 N/m rises to a height of 4 cm. (Angle of contact of paraffin with glass = 28° and acceleration due to gravity = 9.8 m/s2.)
Draw a neat, labelled diagram for a liquid surface in contact with a solid, when the angle of contact is acute.
Two soap bubbles have radii in the ratio 4:3. What is the ratio of work done to blow these bubbles?
If two capillary tubes of different diameters are partially dipped in the same liquid vertically, then the rise of liquid ..........
a) is same in both the tubes
b) is more in the tube of larger ~iameter
c) will not be in smaller diameter tube
d) is more in the tube of smaller diameter
A soap bubble of radius 12 cm is blown. Surface tension of soap solution is 30 dyne/cm. Calculate the work done in blowing the soap bubble.
Obtain an expression for the rise of a liquid in a capillary tube.
A liquid rises to a height of 2.8 cm in a glass capillary 'A'. Another glass capillary 'B' having a diameter of 80% of capillary 'A' is immersed in the same liquid. The rise of liquid in capillary 'B' is ______
A capillary tube of radius r is immersed in water and water rises in it to a height of h. The mass of water in the capillary tube is 5 g. Another capillary tube of radius 2r is immersed in water. The mass of water that will rise in this tube is ______
The radius of curvature of a plane wavefront ______
Two capillary tubes of different diameters are dipped in water. The rise of water is ______.
If a capillary tube is dipped in water in a state of weightlessness, then water will ______.
If a capillary tube is immersed vertically in water, rise of water in capillary is 'h1'. When the whole arrangement is taken to a depth 'd' in a mine, the water level rises to 'h2'. The ratio `"h"_1/"h"_2` is ______. (R = radius of earth)
A capillary tube is vertically immersed in water, water raises upto height 'h1'. When the whole arrangement is taken upto depth 'd' in a mine, the water level rises upto height 'h2'. The ratio of `"h"_1/"h"_2` is _______. (R = radius of earth)
A capillary tube when immersed vertically in a liquid records a rise of 8 cm. If the tube is immersed inclined 60° with the vertical, then length of liquid column along the tube will be ____________.
When a capillary tube is immersed in water vertically, water rises to a height 'h' inside the tube. If the radius of another capillary tube is 1/3rd that of the previous, the height to which water will rise in this tube, is ______.
Water rises to a height of 15 mm in a capillary tube having cross-sectional area 'A'. If cross-sectional area of the tube is made `"'A'"/3` then the water will rise to a height of ______.
Water rises to height 2.2 cm in glass capillary tube. The height to which same water rises in another capillary having `(1/4)^"th"` area of cross-section is ______.
Water rises in a capillary tube to a certain height such that the upward force due to surface tension is balanced by 63 × 10-4 N force due to the weight of the water. The surface tension of water is 7 × 10-2 N/m. The inner diameter of the capillary tube is nearly ______.
(π = 22/7)
When a capillary is dipped vertically in water, rise of water in capillary is 'h'. The angle of contact is zero. Now the tube is depressed so that its length above the water surface is `"h"/2.` The new apparent angle of contact is ______.
cos 0° = 1
A 20 cm long capillary tube is dipped in water. The water rises up to 8 cm. If the entire arrangement is put in a freely falling elevator, then the length of the water column in the capillary tube will be:
A liquid rises in glass capillary tube upto a height of 2.5 cm at room temperature. If another glass capillary tube having radius half that of the earlier tube is immersed in the same Liquid, the rise of liquid in it will be _______.
Two capillary tubes A and B of diameter 1 mm and 2 mm respectively are dipped vertically in a liquid. If the capillary rise in A is 6 cm, then the capillary rise in B is ______.
In a capillary tube having area cross-section 'A' water rises to a height 'h'. If cross-sectional area is reduced to `"A"/9`, the rise of water in the capillary tube is ______.
If a capillary tube of radius 1 mm is immersed in water, the mass of water rising in the capillary tube is m. If the radius of the capillary tube is doubled, then the mass of water that rises in the same capillary tube will be ______.
Water rises to a height of 3.2 cm in a glass capillary tube. Find the height to which the same water rises in another capillary having half the area of the cross-section.
Water rises to a height of 20 mm in a capillary. If the radius of the capillary is made one-third of its previous value, then the new value of capillary rise will be ______.
Water rises in a capillary tube through a height h. If the tube is inclined to the liquid surface at 45°, the liquid will rise in the tube upto its length equal to ______.
A liquid rises to a height of 5 cm in a glass capillary tube of radius 0.02 cm. The height to which the liquid would rise in a glass capillary tube of radius 0.04 cm is ______.
What is the excess of pressure inside a soap bubble of radius 3 cm if the surface tension of the soap solution is 30 dyne/cm?
A steel blade floats on the surface of pure water. When detergent is added, it sinks, why? What is capillarity?
Absorption of water by filter paper is due to ______.
A conductor carrying a current I has three segments, as shown in figure. What is the magnetic field B at the centre of curvature C of the semicircle?
A capillary tube of radius 1 mm is immersed in a beaker of mercury. The mercury level inside the tube is found to be 0.536 cm below the level in the reservoir. Determine the angle of contact between the mercury and glass. (Given: T = 0.485 N/m, p = 13.6 x 103 kg/m3)
