Advertisements
Advertisements
प्रश्न
Find the volume of a cylinder which has a base diameter cm and height 24cm.
उत्तर
Diameter of base = 14cm
∴ Radius (r) = 7cm
Height (h) = 24cm
Volume of cylinder
= π x r2 x h
= `(22)/(7) xx 7^2 xx 24`
= 3696cm3.
APPEARS IN
संबंधित प्रश्न
The total surface area of a hollow cylinder which is open from both sides is 4620 sq. cm,area of base ring is 115.5 sq. cm and height 7 cm. Find the thickness of the cylinder
Find the ratio between the total surface area of a cylinder to its curved surface area, given that its height and radius are 7.5 cm and 3.5 cm.
A well is dug 20 m deep and it has a diameter of 7 m. The earth which is so dug out is spread out on a rectangular plot 22 m long and 14 m broad. What is the height of the platform so formed?
A rectangular sheet of paper 30 cm × 18 cm can be transformed into the curved surface of a right circular cylinder in two ways i.e., either by rolling the paper along its length or by rolling it along its breadth. Find the ratio of the volumes of the two cylinders thus formed.
How many litres of water flow out of a pipe having an area of cross-section of 5 cm2 in one minute, if the speed of water in the pipe is 30 cm/sec?
The length of a road roller is 2.1 m and its diameter is 1.4 m. For levelling a ground 500 rotations of the road roller were required. How much area of ground was levelled by the road roller? Find the cost of levelling at the rate of Rs. 7 per sq. m.
Find the total surface area of a closed cylindrical drum if its diameter is 50 cm and height is 45 cm. (π = 3.14)
The radius and height of a cylinder are in the ratio 5:7 and its curved surface area is 5500 sq.cm. Find its radius and height.
A cylindrical roller 2.5 m in length, 1.75 m in radius when rolled on a road was found to cover the area of 5500 m2. How many revolutions did it make?
Find
How much steel was actually used, if `1/12` of the steel actually used was wasted in making the tank.
`["Assume "pi=22/7]`
