मराठी
कर्नाटक बोर्ड पी.यू.सी.पीयूसी विज्ञान इयत्ता ११

An Ammeter is to Be Constructed that Can Read Currents up to 2.0 A. If the Coil Has Resistance of 25 ω and Takes 1 Ma for Full-scale Deflection, What Should Be the Resistance of the Shunt Used? - Physics

Advertisements
Advertisements

प्रश्न

An ammeter is to be constructed that can read currents up to 2.0 A. If the coil has resistance of 25 Ω and takes 1 mA for full-scale deflection, what should be the resistance of the shunt used?

बेरीज

उत्तर

Let R be the resistance of the shunt used.

Coil resistance, g = 25 Ω

Current through the coil, ig = 1 mA

Total current i through the circuit in which the ammeter is connected = 2 A

Since R and g are connected in parallel,

\[g \times i_g = R\left( i - i_g \right)\]

\[ \Rightarrow R = \frac{g \times i_g}{i - i_g}\]

\[ \Rightarrow R = \frac{25 \times 1 \times {10}^{- 3}}{2 - {10}^{- 3}}\]

\[ \Rightarrow R = 1 . 25 \times {10}^{- 2} \Omega\]

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 10: Electric Current in Conductors - Exercises [पृष्ठ २०१]

APPEARS IN

एचसी वर्मा Concepts of Physics Vol. 2 [English] Class 11 and 12
पाठ 10 Electric Current in Conductors
Exercises | Q 51 | पृष्ठ २०१

संबंधित प्रश्‍न

Three resistors 1 Ω, 2 Ω, and 3 Ω are combined in series. What is the total resistance of the combination?


If the combination is connected to a battery of emf 12 V and negligible internal resistance, obtain the potential drop across each resistor.


Three identical cells each of emf 2V and internal resistance 10 Ω are connected in series to form a battery. The battery is then connected to a parallel combination of two identical resistors, each of resistance 6 Ω. Find the current delivered by the battery.


An ideal battery sends a current of 5 A in a resistor. When another resistor of 10 Ω is connected in parallel, the current through the battery is increased to 6 A. Find the resistance of the first resistor.


A wire of resistance 15.0 Ω is bent to form a regular hexagon ABCDEFA. Find the equivalent resistance of the loop between the points (a) A and B (b) A and C and (c) Aand D.


Find the equivalent resistance of the circuits shown in the figure between the points a and b. Each resistor has resistance r.


Two resistors of equal resistances are joined in series and a current is passed through the combination. Neglect any variation in resistance as the temperature changes. In a given time interval,

(a) equal amounts of thermal energy must be produced in the resistors

(b) unequal amounts of thermal energy may be produced

(c) the temperature must rise equally in the resistors

(d) the temperature may rise equally in the resistors


In the series combination of two or more than two resistances ______.

In parallel combination of n cells, we obtain ______.


An electric current is passed through a circuit containing two wires of the same material, connected in parallel. If the lengths and radii of the wires are in the ratio of 3:2 and 2:3, then the ratio of the current passing through the wire will be ____________.


Assertion (A): To increase the range of an ammeter, we must connect a suitable high resistance in series to it.

Reason (R): The ammeter with increased range should have high resistance.

Select the most appropriate answer from the options given below:


Two electric lamps of each 40 watt are connected in series. The power consumed by the combination will be


The equivalent resistance of resistors connected in series is always ______


The effective resistance of a parallel connection that consists of four wires of equal length, equal area of cross-section and same material is 0.25 Ω. What will be the effective resistance if they are connected in series?


Let there be n resistors R1............Rn with Rmax = max (R1......... Rn) and Rmin = min {R1..... Rn}. Show that when they are connected in parallel, the resultant resistance RP <  R min and when they are connected in series, the resultant resistance RS > Rmax. Interpret the result physically.


An electric cable of copper has just one wire of radius 9 mm. Its resistance is 14Ω. If this single copper wire of the cable is replaced by seven identical well insulated copper wires each of radius 3 mm connected in parallel, then the new resistance of the combination will be:


  • Assertion (A): The equivalent resistance between points A and B in the given networks is 2R.
  • Reason (R): All the resistors are connected in parallel.

 


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×