Advertisements
Advertisements
प्रश्न
A Joker’s cap is in the form of a right circular cone of base radius 7 cm and height 24 cm. Find the area of the sheet required to make 10 such caps.
उत्तर
Given that,
Radius of conical cap (r)=7 cm.
Height of conical cap (h) =24cm.
Slant height (I) of conical cap = `sqrt(r^2+h^2)`
=`sqrt((7)^2+(24)^2cm) `
=25cm
CSA of 1 conical cap `= pirl=22/7xx7xx25cm^2=550cm^2`
Curved surface area of such 10 conical caps`= 5500cm^2`
[∵ 550xx10]
Thus, `5500cm^2` sheet will be req for making of 10 caps.
APPEARS IN
संबंधित प्रश्न
The following figure represents a solid consisting of a right circular cylinder with a hemisphere at one end and a cone at the other. This common radius is 7 cm. The height of the cylinder and cone are each of 4 cm. Find the volume of the solid.
The radius of a cone is 7 cm and area of curved surface is 176 `cm^2`. Find the slant height.
The curved surface area of a cone is 4070 cm2 and its diameter is 70 cm. What is its slant height? (Use it 𝜋 = 22/7).
The circumference of the base of a 10 m height conical tent is 44 metres. Calculate the length of canvas used in making the tent if width of canvas is 2 m. (Use it 𝜋= 22/7).
A bus stop is barricated from the remaining part of the road, by using 50 hollow cones made of recycled card-board. Each cone has a base diameter of 40 cm and height 1 m. If the outer side of each of the cones is to be painted and the cost of painting is Rs. 12 per m2, what will be the cost of painting all these cones. (Use 𝜋 = 3.14 and √1.04 = 1.02)
A conical pit of top diameter 3.5 m is 12 m deep. What is its capacity in kilo litres?
Two right circular cone x and y are made x having three times the radius of y and y having half the volume of x. Calculate the ratio between the heights of x and y.
The radii of the internal and external surfaces of a metallic spherical shell are 3 cm and 5 cm respectively. It is melted and recast into a solid right circular cone of height 32 cm. Find the diameter of the base of the cone.
A solid metallic cone, with radius 6 cm and height 10 cm, is made of some heavy metal A. In order to reduce its weight, a conical hole is made in the cone as shown and it is completely filled with a lighter metal B. The conical hole has a diameter of 6 cm and depth 4 cm. Calculate the ratio of the volume of metal A to the volume of the metal B in the solid.
A cloth having an area of 165 m2 is shaped into the form of a conical tent of radius 5 m. Find the volume of the cone.
