English
Karnataka Board PUCPUC Science Class 11

Find the Change in the Internal Energy of 2 Kg of Water as It is Heated from 0°C to 4°C. the Specific Heat Capacity of Water is 4200 J Kg−1 K−1 and Its Densities at 0°C - Physics

Advertisements
Advertisements

Question

Find the change in the internal energy of 2 kg of water as it is heated from 0°C to 4°C. The specific heat capacity of water is 4200 J kg−1 K−1 and its densities at 0°C and 4°C are 999.9 kg m−3 and 1000 kg m−3 respectively. Atmospheric pressure = 105 Pa.

Sum

Solution

Given:-

Mass of water, M = 2 kg

Change in temperature of the system, ∆θ = 4°C = 277 K

Specific heat of water, sw = 4200 J/kg-°C

Initial density, p0 = 999.9 kg/m3

Final density, pf = 1000 kg/m3

P = 105 Pa

Let change in internal energy be ∆U.

Using the first law of thermodynamics, we get

∆Q = ∆U + ∆W

Also, ∆Q = ms∆θ

W = P∆V = P(Vf - Vi)

⇒ ms∆θ = ∆U + P (V0 − V4)

⇒ 2 × 4200 × 4= ∆U + 105 (∆V)

⇒ 33600 = ∆U + 105

\[\left( \frac{m}{p_0} - \frac{m}{p_f} \right)\]

⇒ 33600 = ∆U + 105 × ( - 0.0000002)

⇒ 33600 = ∆U - 0.02

∆U = (33600 - 0.02) J

shaalaa.com
First Law of Thermodynamics
  Is there an error in this question or solution?
Chapter 4: Laws of Thermodynamics - Exercises [Page 63]

APPEARS IN

HC Verma Concepts of Physics Vol. 2 [English] Class 11 and 12
Chapter 4 Laws of Thermodynamics
Exercises | Q 19 | Page 63

RELATED QUESTIONS

A thermally insulated, closed copper vessel contains water at 15°C. When the vessel is shaken vigorously for 15 minutes, the temperature rises to 17°C. The mass of the vessel is 100 g and that of the water is 200 g. The specific heat capacities of copper and water are 420 J kg−1 K−1 and 4200 J kg−1 K−1 respectively. Neglect any thermal expansion. (a) How much heat is transferred to the liquid-vessel system? (b) How much work has been done on this system? (c) How much is the increase in internal energy of the system?


When a system is taken through the process abc shown in figure, 80 J of heat is absorbed by the system and 30 J of work is done by it. If the system does 10 J of work during the process adc, how much heat flows into it during the process?


50 cal of heat should be supplied to take a system from the state A to the state B through the path ACB as shown in figure. Find the quantity of heat to be suppled to take it from A to B via ADB.


Consider the cyclic process ABCA, shown in figure, performed on a sample of 2.0 mol of an ideal gas. A total of 1200 J of heat is withdrawn from the sample in the process. Find the work done by the gas during the part BC.


A mixture of hydrogen and oxygen is enclosed in a rigid insulating cylinder. It is ignited by a spark. The temperature and pressure both increase considerably. Assume that the energy supplied by the spark is negligible, what conclusions may be drawn by application of the first law of thermodynamics?


For an Isochoric process


The compressibility of water is 5 × 10-10 m2/N. Pressure of 15 × 106 Pa is applied on 100 ml volume of water. The change in the volume of water is ______.


When heat energy of 2000 joules is supplied to a gas at constant pressure 2.1 x 105 N/m2, there is an increase in its volume equal to 2.5 x 10-3 m3. The increase in internal energy of the gas in joules is ____________.


Based on first law of thermodynamics which of the following is correct.


For a particular reaction, the system absorbs 8 kJ of heat and does 2.5 kJ of work on its surrounding. What will be the change in internal energy of the system?


The isothermal bulk modulus of a perfect gas at pressure P is numerically equal to ____________.


An ideal gas undergoes four different processes from the same initial state (figure). Four processes are adiabatic, isothermal, isobaric and isochoric. Out of 1, 2, 3 and 4 which one is adiabatic.


Consider two containers A and B containing identical gases at the same pressure, volume and temperature. The gas in container A is compressed to half of its original volume isothermally while the gas in container B is compressed to half of its original value adiabatically. The ratio of final pressure of gas in B to that of gas in A is ______.


Is it possible to increase the temperature of a gas without adding heat to it? Explain.


An insulated container of gas has two chambers separated by an insulating partition. One of the chambers has volume V1 and contains ideal gas at pressure P1 and temperature T1. The other chamber has volume V2 and contains ideal gas at pressure P2 and temperature T2. If the partition is removed without doing any work on the gas, the final equilibrium temperature of the gas in the container will be ______.


If the adiabatic ratio for a gas is 5/3, find the molar specific heat capacity of the gas at (i) constant volume (ii) constant pressure.


Consider the cyclic process ABCA on a sample of 2.0 mol of an ideal gas as shown in following figure. The temperature of the gas at A and B are 300 K and 500 K respectively. A total of 1200 J heat is withdrawn from the sample in this process. Find the work done by the gas in part BC. (R = 8.3 J/mol K) 


Calculate work done when 2 moles of ideal gas expands by 5 dm3 isothermally at pressure 1.2 bar.


Write a short note on isobar.


Define the isothermal process.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×